Scandoil  

SP Compression Load Cell Performs BOP Clamp Load Test


Published Oct 17, 2017
[an error occurred while processing this directive]

Edit page New page Hide edit links

Carl Stahl UAE - Straightpoint - 137.5-tonne load test
Carl Stahl UAE accepted a scope of work to plan and execute a 137.5-tonne load test (photo: Carl Stahl UAE)

Carl Stahl UAE used four hydraulic cylinders and a wireless compression load cell from Straightpoint (SP) to perform a load test on a blowout preventer (BOP) clamp for an undisclosed client in the Middle East recently.

Carl Stahl, a distributor of SP’s range of force measurement technologies and other lifting equipment, accepted a scope of work to plan and execute a 137.5-tonne load test, and report the findings back to the customer. The BOP in its entirety will be used to stop the uncontrolled flow of liquids and gases during well drilling operations. It is essentially a large, high-pressure valve.

The clamp was flat on the ground, above which the four 50-tonne capacity hydraulic cylinders were positioned along a beam; above that, the 150-tonne capacity compression load cell was beneath a larger beam rigged to a forklift truck. A shackle at either end of the larger (red) beam connected it to the clamp.

Sinoj Antony, technical manager at Carl Stahl UAE, says, “We used beams to constrain the load within the system and steel plates as footings to spread the load over the surface of the BOP clamp. The forklift was only used to setup the system; the load application was achieved through hydraulic cylinders.”

David Ayling, director at SP, adds, “In essence, they [Carl Stahl UAE] spread the lift along the bottom beam and transferred it to the load cell. The same principle could be applied to use of our full range of compression load cells up to 500-tonne capacity.”

Carl Stahl’s three-person team took readings from the load cell on an SP Hand Held Plus, which allowed them to remain a safe distance from the load. Ayling says this was the main advantage of utilising this combination of SP equipment.

“We offer wireless software for data logging of static or dynamic tests,” he says. “The package produces real time load test certification and even boasts centre of gravity software. We also offer a range of base stations that can be used for signal boosting or connection to third-party equipment, such as a PLC with analogue interfaces.”

Carl Stahl’s customers have also noted the absence of troublesome and hard to maintain cables. Antony added that maintenance costs are therefore eliminated and pointed to the product’s versatility in heavy lift, energy, defence, rigging, shipping and other Middle Eastern marketplaces.

He concludes, “We were happy with the performance of the wireless compression load cell and would utilise it again for such an assignment.”

Tags: Carl Stahl UAE, Straightpoint




Advertisment:

Comments on this page are closed.

+ Larger Font | + Smaller Font
Top Stories

 

 

 

 


 


RSS

RSS
Newsletter
Newsletter
Mobile News
Mobile news

Computer
Our news on
your website


Facebook
Facebook
Twitter
Twitter

Contact
Contact
Tips
Do you have any
tips to us
Stats

 

sitemap xml