Amerril Energy LLC (Amerril) as the Operator of the Richland Oil Project is continuing work over operations on the Richland Oil Project's 4 oil production wells:

•Ellis #1H: Oil production is continuing after installation of the jet pump with increases in both oil rate and percentage oil cut recorded. Enlargement of surface facilities are underway to maximise the fluid rate capacity of the well and to allow the increased fluid recovery rates to stabilise. •Beeler #1H and John Beeler #1H: These two wells have been successfully returned to oil production and frac fluid recovery. Based on the early success of the jet pump installed on the Ellis #1H well, Amerril has decided to install jet pumps rather than rod pumps on both of these wells to increase fluid rates. •John Beeler #2: Amerril has commenced work over operations to isolate the Buda formation and perform swabbing of the Upper, Middle and Lower Woodbine intervals to improve oil and frac fluid recovery rates from those intervals.

Tags: Sun Resources NL